Skip to content
Keller Roof Pros

Keller Metal Roofing Residential & Commercial

Metal Roofing in Keller, TX

Keller Roof Pros provides professional metal roofing in Keller, TX for residential and commercial properties across north Tarrant County. Metal is a good roof and a bad default. In Keller the first question is not whether you like the look, it is what sits under the panels, because a metal roof's fire class comes from the whole assembly rather than from the steel on top of it.

That is the part that surprises people. Steel does not burn, but a panel system installed directly over open framing or over spaced boards is not the assembly anybody listed, and the listing is what the class floor is measured against. On a house that once carried shake, the spaced one-by-four sheathing has to come off or be re-sheeted in structural panels before a panel roof is a legitimate proposal in this city.

The assembly we build is unglamorous and it works. Solid deck, self-adhered high-heat underlayment where the panel will run hot, 24-gauge Galvalume standing seam on concealed floating clips so the panel can move with temperature, hemmed eave and rake, and panel-specific closures at the ridge instead of a foam strip and optimism. Exposed-fastener panels have their place on a barn and almost none on a house.

Movement is the failure mode nobody plans for. A long panel on a Keller roof swings through a very wide temperature range between a January morning and an August afternoon, and a panel pinned at both ends by fixed fasteners will oil-can, elongate its holes and eventually leak at every screw. Floating clips and a properly detailed expansion end are not upgrades, they are the product working the way it was drawn.

Our honest recommendation for most homes in this city is partial metal. Standing seam over the low-slope porch tie-in, the entry roof or the bay projection solves the exact planes that fail first on the 1990s and 2000s stock, costs a fraction of a full conversion, and leaves the big simple field in a laminate that is far cheaper to repair after hail.

A full metal roof makes sense when you plan to stay twenty-five years, when the roofline is simple enough that the panel runs are long and clean, and when you have priced the difference honestly against two shingle roofs. If two of those three are missing, we will tell you the money is better spent elsewhere on the house.

Our licensed and insured team brings the right materials and equipment to every job — Class A roof assemblies listed to ASTM E108 and UL 790, fiberglass-mat laminate shingles carrying a listed covering class, individual replacement shingles matched to the listed class, polymer shake profiles that hold their own covering listing, spaced one-by-four sheathing left behind by a shake roof, 7/16-inch structural panel re-sheeting over open framing — and backs the work with a written workmanship warranty. We serve Keller and nearby communities including Southlake, Colleyville, Grapevine, Westlake.

What We Handle

Everything our metal roofing in Keller covers

One crew, one point of contact, and the full range of metal roofing work in Keller, TX. If it is on this list we do it in house rather than handing it to a subcontractor:

  • metal roofing Keller TX
  • standing seam roof Keller
  • metal roof cost Keller Texas
  • Galvalume roof Keller TX
  • metal roofing contractor Keller
  • standing seam installer Keller Texas
  • metal roof over shingles Keller
  • residential metal roof Keller TX
  • porch metal roof Keller
  • exposed fastener metal roof Keller
  • 24 gauge standing seam Keller TX
  • metal roof panels Keller Texas

Not sure which one describes your situation? Describe it in plain words and we will sort it out — or browse the rest of our Keller services.

Materials, equipment and how we do metal roofing

The difference between metal roofing that lasts and metal roofing that gets redone in three years is almost always preparation and materials, not the finish you see on day one. We work with Class A roof assemblies listed to ASTM E108 and UL 790, fiberglass-mat laminate shingles carrying a listed covering class, individual replacement shingles matched to the listed class, polymer shake profiles that hold their own covering listing, spec them to the job instead of to the invoice, and write the material grades into the free estimate so you know exactly what you are buying.

Every Keller job runs the same way: site walk and measurements, written scope and fixed price, protection of the surrounding area, then the work itself with a daily clean-up. Years of roofing work in north Tarrant County means we have already met whatever your property is going to throw at us — awkward access, older construction, an HOA with opinions.

Where we do metal roofing outside Keller

Keller Roof Pros covers Keller and the surrounding communities of north Tarrant County. Crews run out to the same nearby cities every week, so an out-of-town job does not mean an out-of-town price.

Start on the Keller Roof Pros homepage for a free estimate, or call (844) 511-2320 and describe the job.

Why Keller Chooses Keller Roof Pros

  • We measure the damaged area as a share of the whole roof before quoting, because in Keller that percentage decides whether the work is legally a repair.
  • Every proposal names the covering listing we intend to install, the deck we expect to find, and the re-sheeting price if the deck disagrees with us.
  • We stock current listed shingles in common Keller colors, so a patch uses material that carries the class itself rather than leftovers of unknown rating.
  • We argue against tile on most Keller trusses and against coatings on every shingle roof, and we put the reasoning in writing rather than in conversation.

The standards behind metal roofing

Quality here is not a matter of opinion — it is written down. The metal roofing work we do in Keller follows published industry standards: NRCA publishes the Roofing Manual, the industry's reference for details and slope minimums, and Asphalt Roofing Manufacturers Association sets the shingle application and ventilation guidance the warranties reference. If a contractor cannot tell you which standard a detail comes from, that is worth asking about before you sign.

Every metal roofing project in Keller gets the same attention, whether it is a single room or a full commercial job. We show up on schedule, keep the site clean, and stand behind the work — the estimate is free and there is no pressure.

Ready to get started? Call (844) 511-2320 for a free metal roofing free estimate in Keller, or request a quote and we'll get right back to you.

Related Services

Metal Roofing in Keller: Common Questions

How much does metal roofing cost in Keller, TX?

It comes down to square footage, access, the condition of what is already there, and the materials you choose — Class A roof assemblies listed to ASTM E108 and UL 790, fiberglass-mat laminate shingles carrying a listed covering class, individual replacement shingles matched to the listed class. We do not price a job off a phone call and a guess.

We measure on site and hand you an itemized free estimate with the scope written out, so you can compare it line by line against anyone else's number.

How long does a metal roofing job take?

Most residential metal roofing work in Keller runs from a single day to about a week once materials are on site. Larger commercial jobs get phased so the property keeps operating. Weather, permit review and material lead times are the usual reasons a date moves, and you hear about those from us before the crew starts, not after.

Do you pull permits and handle inspections in Keller?

Yes, on any work that needs one. We file with the Keller building department, schedule the inspection and stay on site for it. Skipping a permit is how property owners end up paying twice — once for the work, and again when it fails at resale or an insurance claim.

Is Keller Roof Pros licensed and insured?

There is no state credential in this trade for anyone to show you. The state's own list of regulated trades, maintained at the Texas Department of Licensing and Regulation, has no entry for roofing.

An industry group in Austin, the Roofing Contractors Association of Texas, does issue a credential of its own; that one is trade-run, entirely voluntary, and in no sense a government document. Keller adds nothing further for roofers.

What is enforceable in this city is the permit and the inspection behind it, issued under Chapter 4, Buildings, of the Keller Code of Ordinances and the building and residential codes adopted there.

Keller's amendments to those codes put a minimum class on every roof covering and on each individual replacement shingle, and strike wood shingles and wood shakes from the permitted list on new work and re-roofing alike. We pull the permit under our own name and we are on the roof with the inspector..

General liability and workers' compensation, both current, both verifiable before a single bundle reaches your driveway. Ask that the certificates come to you straight from our agent rather than as a file we forward, because a forwarded file proves nothing about whether a policy is still in force this week.

Texas obliges a roofer to carry neither coverage and requires no surety bond of us, which is exactly why the question is worth putting to us and to everyone else you are considering.. We do not claim memberships we cannot point you at a member list for. What we will commit to is practice.

Shingles go up the way the manufacturer prints it in its own application instructions, because those instructions are the only thing a material warranty answers to. Flashing is detailed to NRCA practice. Roof-covering classifications come from the listing for the assembly as tested under ASTM E108 and UL 790, and not from the marketing printed on the wrapper..

Every metal roofing job carries A written workmanship warranty on our labor, issued as its own document and held apart from the material warranty the manufacturer issues in its own name. Both reach you at closeout, along with the permit card, the covering listing we installed to, and photographs of the deck taken before anything went over it..

Ask any contractor for those four things in writing before you sign — the ones who hesitate are telling you something.

Do you take commercial roofing work as well as residential?

Both. Keller Roof Pros runs residential metal roofing across Keller neighborhoods and commercial work for offices, retail, restaurants, apartment complexes and HOA properties throughout north Tarrant County. Commercial jobs get phased scheduling and off-hours crews so tenants and customers are not shut out while the work happens.

Call Now